Samindi Samarakoon

Professor

Samindi Samarakoon

Contact

Telephone: 51832387

Email: samindi.samarakoon@uis.no

Room: KE E-224

Department

Faculty of Science and Technology

Department of Mechanical and Structural Engineering and Materials Science

About me

Dr. S.M Samindi M.K Samarakoon is a professor (100% - since October 2022) in Structural Engineering (Concrete structures and materials) at the University of Stavanger, Norway. She worked as an associate professor from 2012 to 2022 at the University of Stavanger, Norway. She received a B.Sc. in Civil Engineering from the University of Peradeniya, Sri Lanka, an M.Eng. in Civil and Environmental Engineering from the Asian Institute of Technology, and a PhD in Offshore Engineering and an equivalent PhD qualification in the durability of concrete structures from the University of Stavanger, Norway. Currently, she lectures on the design and analysis of reinforced concrete structures for B.Sc. students, the design and analysis of pre-stressed concrete structures, and the condition assessment of existing concrete structures for M.Sc. students. She also teaches a PhD course on "Selected Topics in Structural Engineering" at the Department of Mechanical and Structural Engineering and Materials Science, University of Stavanger, Norway.

Dr. Samarakoon is currently supervising B.Sc. and M.Sc. thesis projects, as well as PhD research projects. She has published a number of articles in peer-reviewed journals and conference proceedings, as well as a book chapter. She has served as an ad hoc reviewer and a member of the technical committee for several international conferences and journals.

Ongoing Research:

  • Development of Low carbon concrete using industrial by products and natural pozzolans.
  • Development of alkali activated cement.
  • Crack control in concrete structures.
  • Lean construction and Building Information Modelling (BIM) applications.
  • Risk and Reliability based technology qualification.
  • Gamification and immersive learning-based teaching methods development.

Work Experience 

  • 08.2022 to up to date Professor, IMBM, University of Stavanger, Norway
  • 06.2012- 09.2022 Associate Professor, IMBM, University of Stavanger, Norway
  • 09.2011- 05.2012 Lecturer, IMBM, University of Stavanger, Norway 
  • 09.2008 - 8.2011 Research Fellow, IMBM, University of Stavanger, Norway  
  • 02.2007-09.2008 Lecturer, Dept. of Engineering Management, University of Peradeniya, Peradeniya, Sri Lanka. 
  •  08.2005-02.2007 Lecturer, Dept. of Civil Engineering, University of Peradeniya, Peradeniya, Sri Lanka.  
  • 08.2003-05.2005 Master Student, Asian Institute of Technology, Bangkok, Thailand  
  • 12.2002-05.2003Instructor, Dept. of Civil Engineering, University of Peradeniya, Peradeniya, Sri Lanka.  

Education 

  •  Ph.D. in Offshore Engineering, University of Stavanger, Norway (Double qualified: 1. Technology Qualification in Offshore Industry; 2. Structural Engineering - specialized in durability assessment and control of reinforced concrete structures)
  •  M.Eng. Asian Institute of Technology, Thailand  
  • B.Sc. Eng. in Civil Engineering, Univ. of Peradeniya, Sri Lanka 

University Pedagogy/Teaching Methodology Training 

  • Completed Basic Course in University Pedagogy (Hours: 100).
  • UiS PhD-Supervisory Qualification Programme(Hours: 100)

     Completed PhD Project/Post doc

  • Main supervisor  of Dr. Chavin Guruge, Tile: Cracking Behaviour of Reinforced Concrete Structures Subjected to Service Load: Experimental and Numerical Investigation. Defended on 27.10.2021.  https://uis.brage.unit.no/uis-xmlui/handle/11250/2789578
  • Main Supervisor of Dr. Noorhan Firdaus Pambudi, title: “Sustainable Circular Business Ecosystem in Plastic Waste Supply Chain: Challenges and Strategies”. Dual supervision, University of Stavanger, Norway and Institut Teknologi Bandung, Indonesia, Defended on 11.10.2024. https://uis.brage.unit.no/uis-xmlui/handle/11250/3153220
  • Co-supervisor of Dr. Kartika Nur Alfina, Title: «Performance Enhancement in Healthcare Sector Supply Chains for Adapting Circular Economy Goals”, Defended on 27.10.2024. https://uis.brage.unit.no/uis-xmlui/handle/11250/3156008
  • Main supervisor: post-doctoral research fellow: Dr. Mohammadreza Kamali, Title: “Developing Organic Retarder for Geopolymers for Elevated Temperatures”, University of Stavanger. (2022 May to 2024 May)
  • Main Supervisor of Dr.Nirosha Adasooriya in 2018, Initial title: Modelling of corrosion propagation phase in steel reinforcement /pre-stressing tendons of concrete structures in marine environment: Service life prediction. Project was started and published one journal paper (https://www.witpress.com/elibrary/cmem-volumes/6/3/1995). Internally transferred the project to another area of research and defended her thesis in 2020, title: Structural Integrity of Steel Bridges: Environment-Assisted Cracking. 

    Ongoing PhD Projects

  • Main supervisor of Mr. Dileepa Hettiarachchi, Title: “Investigation of mechanical properties and damage evolution in low carbon concrete subjected to cyclic loading”, (2022-2025).
  • Co-supervisor of Ms. Daria Biskupska: Tentative Title: “Performance improvement of complex engineering projects: Digitalization and use of LEAN concepts”, Blueday Technology and University of Stavanger, Norway, (2019-2025).
  • Co-supervisor of Ms. Aleksandra Jankovic, Tentative Title: “Circular tech product development in health and educational industries in Norway”; Industrial PhD; Research Council Norway, (2024-2027).
  • Co-supervisor of Ms. Ishara Perera, Tentative title: “Minimizing Textile Waste and Advancing Circular Economy in Textile Production through Enhanced EPR: Employing LCA, AI, and Machine Learning” ,(2025 to 2028).

International project experience 

  • BIM4PLACEMENT (2016-2018), Proj.No: 2016-1-IT01-KA202-005399: BIM4PLACEMENT European key competences in building and construction. Objective of the BIM project is to develop training program to disseminate knowledge about building information modelling. Total Grant : 262980 Euro. 
  • I-TRACE (2018-2020), Proj. No. 2018-1-IT01-KA202-006836 ,Immersive TRAining for aerospace, KA2 - Cooperation for Innovation and the Exchange of Good Practices, KA202 - Strategic Partnerships for vocational education and training, University of Stavanger, Norway; University of Rzeszow, Poland; Associazione di promozione sociale FO. RIDE. S; Istituto Tecnico Settore Tecnologico "E.FERMI"; CADLAND SRL, CONSELL GENERAL DE LES CAMBRES OFICIALS DE COMERC INDUSTRIA IN NAVEGACIO DE CATALUNYA; Institut Illa dels Banyols, Italy. Total Grant :284155 Euro
  •  TEAL2. O (2019-2023) Proj. No. 610186-EPP-1-2019-1-LK-EPPKA2-CBHE-JP, Improving Access to Science and Technology Higher Education in Resource-Poor Institutions through an Open Platform for Technology Enabled Active Learning; UoP and SLTC Sri Lanka; IITA, India; Vellore Institute of Technology (VIT), India; AIT, Thailand; University of Bologna, Italy; University Transylvania of Brasov, Romania; ECQ, Bulgaria; NU, Thailand; UoM, Sri Lanka; Total Grant 999091 Euro.
  • AIdesignTEX(2024-2027) - Innovative IT tools for a circular textile economy: driving sustainability and resource efficiency, HORIZON-WIDERA-2023-ACCESS-02 (Twinning) - Type of Model Grant Agreement: HORIZON Lump Sum Grant, Proposal number: 101159060, (Total Budget 1 498 183.75 Euro).
  • NORHED II portfolio (2021-2025) - Enhancing Lean Practices in Supply Chains: Digitalization (Total Budget 9.916 Mn Nkr). Participating countries: Sri Lanka, Indonesia and Norway. 

National grants

  • 2021-2024, NRC project  (Kompetanse- og samarbeidsprosjekt), Project title: "New Cementitious Material for Oil Well Cementing Applications - SafeRock", Role:Work package leader.

PhD: Internal administrator and member of PhD assessment committee

  • Second opponent in the evaluation committee for the PhD thesis of Otto Terjesen, titled "Formulation of a consistent crack width calculation method for reinforced concrete members," at the University of Agder, Norway, in May 2024.
  • First opponent in the evaluation committee for the PhD thesis of Arman Montazerian, titled "Machine Learning and Computational Micromechanics Models for Multifunctional Cementitious Composites Reinforced by Graphene Derivatives: Mechanical and Functional properties," at NTNU Gjøvik, in August 2024.
  • Second opponent in the evaluation committee for the PhD thesis of Jelena Zivkovik, titled "Ductility and brittleness of lightweight aggregate concrete structures," at the Norwegian University of Science and Technology (NTNU), Norway, in 2020.
  • Second opponent in the evaluation committee for the PhD thesis of Emad Abd‐EI‐Hamied EI‐ Maghraby Mohamed, titled "Predicting production rates of pouring ready mixed concrete by using Tower Cranes in Egypt," in 2014.
  • Administrator in the evaluation committee for the PhD thesis of Fawzi Chamssine, titled "Instituting Retarders for Geopolymers Developed for Downhole Applications," at the University of Stavanger, in 2023.
  • Administrator in the evaluation committee for the PhD thesis of Rasmus Asp Juhlin, titled "Subsea Pumped Hydro Energy Storage – exploring the need, possibilities and limitations in the Energy Transition," in September 2024.

Publications

Vitenskapelige publikasjoner

Paranavithana, Ganila Nuwan; Samarakoon, Samarakoon Mudiyansele Samindi; Chathurika, Ramasundara Hettige Jayani

(2024)

Analysis of road construction waste generation in developing economies: A focus on surfacing and sub-base construction projects in Sri Lanka.

Journal of Cleaner Production.

ISSN 0959-6526.

Volum 457.

DOI: 10.1016/j.jclepro.2024.142465

Thebuwena, Arachchige Chandana; Samarakoon, Samarakoon Mudiyansele Samindi; RATNAYAKE MUDIYANSELAGE, Chandima

(2024)

Optimization of energy consumption in vertical mobility systems of high-rise office buildings: A case study from a developing economy.

Energy Efficiency.

ISSN 1570-646X.

Volum 17.

Hefte 6.

DOI: 10.1007/s12053-024-10246-5

Thebuwena, A. Chandana Hemantha J.; Samarakoon, Samarakoon Mudiyansele Samindi; RATNAYAKE MUDIYANSELAGE, Chandima

(2024)

On the Necessity for Improving Water Efficiency in Commercial Buildings: A Green Design Approach in Hot Humid Climates.

Water.

ISSN 2073-4441.

Volum 16.

Hefte 17.

DOI: 10.3390/w16172396

Samarakoon, Samarakoon Mudiyansele Samindi; Kamali, Mohammadreza; Gebremariam, Kidane Fanta; Tesfay, Fissihaye; Mesfin, Daniel Seyoum; Baqala, Maliyon Mokonnon; Yousefi Oderji, Sajjad

(2024)

Investigating the influence of precursor combinations on the development of one-part alkali-activated binders using SiMn.

Case Studies in Construction Materials.

ISSN 2214-5095.

Volum 21.

DOI: 10.1016/j.cscm.2024.e03887

Hettiarachchi, Dileepa Chathuranga; Samarakoon, Samarakoon Mudiyansele Samindi; Fosså, Kjell Tore; Gebremariam, Kidane Fanta; Khalifeh, Mahmoud

(2024)

Silicon Manganese Slag as Supplementary Cementitious Material in Low Carbon Composite Mortar.

Proceedings of the fib Symposium.

ISSN 2617-4820.

Volum 66.

s.733-740.

Samarakoon, Mudiyansele Samindi Manjula K; Piatek, Bartosz; Subashi De Silva, G. H. M. J.

(2023)

Investigation of the Flexural Behavior of Preloaded and Pre-Cracked Reinforced Concrete Beams Strengthened with CFRP Plates.

Materials.

ISSN 1996-1944.

Volum 16.

Hefte 1.

DOI: 10.3390/ma16010022

Pambudi, Noorhan Firdaus; Samarakoon, Mudiyansele Samindi Manjula K; Simatupang, Togar Mangihut; Mulyono, Nur Budi; Okdinawati, Liane

(2023)

Circular Waste Management by Start-Up Companies in Indonesia Using a Bottom-Up Circular Economy Business Model.

Lecture Notes in Mechanical Engineering.

ISSN 2195-4356.

s.349-357.

DOI: 10.1007/978-3-031-17629-6_36

Kamali, Mohammadreza; Khalifeh, Mahmoud; Samarakoon, Mudiyansele Samindi Manjula K; Salehi, Saeed; Wu, Yuxing

(2023)

Effect of Organic Retarders on Fluid-State and Strength Development of Rock-Based Geopolymer. I: International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures.

Springer.

ISBN 978-3-031-33186-2.

Wu, Yuxing; Salehi, Saeed; Kamali, Mohammadreza; Khalifeh, Mahmoud; Samarakoon, Mudiyansele Samindi Manjula K

(2023)

Experimental and numerical evaluation of the integrity of cement and geopolymer under low and elevated temperature well conditions. I: 57th U.S. Rock Mechanics/Geomechanics Symposium.

American Rock Mechanics Association (ARMA).

ISBN 978-0-9794975-8-2.

DOI: 10.56952/ARMA-2023-0240

Silva, Sudhira; Samarakoon, Samarakoon Mudiyansele Samindi; Haq, M.A.A.

(2023)

Use of circular economy practices during the renovation of old buildings in developing countries.

Sustainable Futures.

Volum 6.

Hefte 100135.

DOI: 10.1016/j.sftr.2023.100135

Naotunna, Chavin Nilanga ; Samarakoon, Mudiyansele Samindi Manjula K; Fosså, Kjell Tore

(2022)

Influence of concrete cover thickness and clear distance between tensile bars on crack spacing behavior of large-scale reinforced concrete members.

Fatigue & Fracture of Engineering Materials & Structures (FFEMS).

ISSN 8756-758X.

Volum 45.

Hefte 4.

s.1052-1064.

DOI: 10.1111/ffe.13650

Azad, Amaanuddin M.; Anshul, Avneesh; Azad, Numanuddin M.; Samarakoon, Mudiyansele Samindi Manjula K; Yadav, Ravikant; Bherwani, Hemant; Gupta, Ankit; Gebremariam, Kidane Fanta

(2022)

Pervious geopolymer concrete as sustainable material for environmental application.

Materials Letters.

ISSN 0167-577X.

Volum 318.

DOI: 10.1016/j.matlet.2022.132176

Al-Yacouby, Ahmad Mahamad; Arwie Amri, Mazli; Liew, M. S.; RATNAYAKE MUDIYANSELAGE, Chandima; Samarakoon, Mudiyansele Samindi Manjula K

(2022)

Finite Element Analysis of Steel Plates with Rectangular Openings Subjected to Axial Stress.

Materials.

ISSN 1996-1944.

Volum 15.

Hefte 13.

DOI: 10.3390/ma15134421

Selsøyvold, Torgeir; Samarakoon, Mudiyansele Samindi Manjula K; Nazarko, Piotr

(2022)

Artificial Neural Network Model for Predicting the Tendon Stress in Unbonded Posttensioned Concrete Members at the Ultimate Limit State.

Journal of Structural Engineering.

ISSN 0733-9445.

Volum 148.

Hefte 10.

DOI: 10.1061/(ASCE)ST.1943-541X.0003445

Subashi De Silva, G. H. M. J.; Aagani, T.H.F; Gebremariam, Kidane Fanta; Samarakoon, Mudiyansele Samindi Manjula K

(2022)

Engineering properties and microstructure of a sustainable roof tile manufactured with waste rice husk ash and ceramic sludge addition.

Case Studies in Construction Materials.

ISSN 2214-5095.

Volum 17.

DOI: 10.1016/j.cscm.2022.e01470

Samarakoon, Mudiyansele Samindi Manjula K; RATNAYAKE MUDIYANSELAGE, Chandima

(2022)

End-of-life solution prioritization for pre-cast concrete components aligning with circular economy targets.

Structural Concrete.

ISSN 1464-4177.

DOI: 10.1002/suco.202200572

Pambudi, Noorhan Firdaus; Simatupang, Togar Mangihut; Samarakoon, Mudiyansele Samindi Manjula K; Mulyono, Nur Budi

(2022)

The Role of Collaboration for a Circular Business Model in Indonesian Household Waste Management. I: 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) 7-10 Dec 2022.

IEEE conference proceedings.

ISBN 9781665486873.

s.0650-0654.

DOI: 10.1109/IEEM55944.2022.9989920

Azad, Numanuddin M.; Samarakoon, Mudiyansele Samindi Manjula K

(2021)

Utilization of Industrial By-Products/Waste to Manufacture Geopolymer Cement/Concrete .

Sustainability.

ISSN 2071-1050.

Volum 13.

Hefte 2.

DOI: 10.3390/su13020873

Guruge, Chavin Nilanga Naotunna Palliy; Samarakoon, Mudiyansele Samindi Manjula K; Fosså, Kjell Tore

(2021)

Experimental investigation of crack width variation along the concrete cover depth in reinforced concrete specimens with ribbed bars and smooth bars.

Case Studies in Construction Materials.

ISSN 2214-5095.

Volum 15.

DOI: 10.1016/j.cscm.2021.e00593

Guruge, Chavin Nilanga Naotunna Palliy; Samarakoon, Mudiyansele Samindi Manjula K; Fosså, Kjell Tore

(2021)

Applicability of Existing Crack Controlling Criteria for structures with Large Concrete Cover Thickness.

Nordic Concrete Research.

ISSN 0800-6377.

Hefte 1.

s.69-91.

DOI: 10.2478/ncr-2021-0002

Naotunna, Chavin Nilanga ; Samarakoon, Mudiyansele Samindi Manjula K; Fosså, Kjell Tore

(2021)

A new crack spacing model for reinforced concrete specimens with multiple bars subjected to axial tension using 3D nonlinear FEM simulations.

Structural Concrete.

ISSN 1464-4177.

Volum 22.

Hefte 6.

s.3241-3254.

DOI: 10.1002/suco.202100025

Al-Yacouby, Ahmad Mahamad; Hao, Lo Jia; Liew, M. S.; RATNAYAKE MUDIYANSELAGE, Chandima; Samarakoon, Mudiyansele Samindi Manjula K

(2021)

Thin-Walled Cylindrical Shell Storage Tank under Blast Impacts: Finite Element Analysis.

Materials.

ISSN 1996-1944.

Volum 14.

Hefte 22.

DOI: 10.3390/ma14227100

Birkemo, Anders Sagvåg; Samarakoon, Mudiyansele Samindi Manjula K

(2021)

APPLICATION OF GENERATIVE DESIGN FOR STRUCTURAL OPTIMIZATION AT THE CONCEPTUAL DESIGN PHASE.

WIT Transactions on the Built Environment.

ISSN 1746-4498.

Volum 205.

s.139-153.

DOI: 10.2495/BIM210121

Sigvaldsen, Marie; Ersdal, Gerhard; Markeset, Gro; Samarakoon, Mudiyansele Samindi Manjula K; Langeteig, Magne

(2021)

Capacity of Concrete Structures with Corroded Reinforcement and Prestressing Tendons.

IOP Conference Series: Materials Science and Engineering.

ISSN 1757-8981.

Volum 1201.

DOI: 10.1088/1757-899X/1201/1/012052

Naotunna, Chavin Nilanga ; Samarakoon, Mudiyansele Samindi Manjula K; Fosså, Kjell Tore

(2020)

Experimental and theoretical behavior of crack spacing of specimens subjected to axial tension and bending.

Structural Concrete.

ISSN 1464-4177.

DOI: 10.1002/suco.201900587

Samarakoon, Mudiyansele Samindi Manjula K; Hodne, Bjarte

(2020)

Parametric study of different unbonded tendon layouts in pre-stressed concrete flat plates .

International Journal of Concrete Structures and Materials.

ISSN 1976-0485.

Volum 14.

DOI: 10.1186/s40069-020-00433-w

Guruge, Chavin Nilanga Naotunna Palliy; Samarakoon, Mudiyansele Samindi Manjula K; Fosså, Kjell Tore

(2019)

COMPARISON OF THE BEHAVIOR OF CRACK WIDTH-GOVERNING PARAMETERS WITH EXISTING MODELS . I: Proceedings of the International Conference on Sustainable Materials, Systems and Structures (SMSS2019). Challenges in Design and Management of Structures, 20-22 March 2019 – Rovinj, Croatia. PRO 128, Vol. 4..

Rilem publications.

ISBN 978-2-35158-226-8.

s.124-131.

Samarakoon, Mudiyansele Samindi Manjula K; RATNAYAKE MUDIYANSELAGE, CHANDIMA RATNAYAKE

(2019)

RISK BASED INSPECTION PLANNING METHODOLOGY FOR CONCRETE BRIDGES . I: Proceedings of the International Conference on Sustainable Materials, Systems and Structures (SMSS2019). Challenges in Design and Management of Structures, 20-22 March 2019 – Rovinj, Croatia. PRO 128, Vol. 4..

Rilem publications.

ISBN 978-2-35158-226-8.

s.184-191.

Samarakoon, Mudiyansele Samindi Manjula K; Hovind, Pål Ruben; Pedersen, Jørgen Wie; Evangelista, Luis

(2019)

Mechanical performance of concrete made of steel fibers from tire waste.

Case Studies in Construction Materials.

ISSN 2214-5095.

Volum 11.

s.1-9.

DOI: 10.1016/j.cscm.2019.e00259

Samarakoon, Mudiyansele Samindi Manjula K; Vårvik, Anette; Kielsen, Birgitte

(2019)

EXPERIMENTAL INVESTIGATION OF FRACTURE PROPERTIES OF CONCRETE WITH RECYCLED STEEL FIBERS RECOVERED FROM TIRE WASTE . I: Concrete innovations in materials, design and structures : Proceedings of the fib Symposium 2019 held in Krakow, Poland 27-29 May 2019.

The International Federation for Structural Concrete.

ISBN 978-2-940643-00-4.

s.463-470.

Djuve, Kristine; Samarakoon, Mudiyansele Samindi Manjula K; Sæstad, Håkon Emil Helland

(2019)

ANALYSIS OF VARYING SKEW ANGLE IN A SINGLE SPAN REINFORCED CONCRETE PLATE BRIDGE. I: Concrete innovations in materials, design and structures : Proceedings of the fib Symposium 2019 held in Krakow, Poland 27-29 May 2019.

The International Federation for Structural Concrete.

ISBN 978-2-940643-00-4.

s.1393-1399.

Birkemo, Anders Sagvåg; Hjortland, Simen Christensen; Samarakoon, Mudiyansele Samindi Manjula K

(2019)

Improvements for the workflow interoperability between BIM and FEM tools.

WIT Transactions on the Built Environment.

ISSN 1746-4498.

Volum 192.

s.317-327.

DOI: 10.2495/BIM190271

Gjerde, Marit Ragnhild Dahl; RATNAYAKE MUDIYANSELAGE, Chandima; Samarakoon, Mudiyansele Samindi Manjula K

(2019)

Effective Implementation of Last Planner System® in Construction Projects: A Case Study . I: Proceedings of the 2019 IEEE International Conference on Industrial Engineering and Engineering Management.

IEEE (Institute of Electrical and Electronics Engineers).

ISBN 978-1-7281-3804-6.

s.1139-1144.

Bernhoft, Katerina; Samarakoon, Mudiyansele Samindi Manjula K; Evangelista, Luis; Mikalsen, Bjarne

(2018)

Performance of recycled and commercial fibre reinforced concrete beams in combined action with conventional reinforcement. I: SynerCrete'18: Interdisciplinary Approaches for Cement-based Materials and Structural Concrete: Synergizing Expertise and Bridging Scales of Space and Time. Vol. 1&2..

Rilem publications.

ISBN 978-2-35158-202-2.

s.981-986.

RATNAYAKE MUDIYANSELAGE, CHANDIMA RATNAYAKE; Abdel Aziz Mahmoud Saad, Yousef Tarek; Karunaharan, Kamshan; Samarakoon, Mudiyansele Samindi Manjula K

(2018)

INSPECTION AND MAINTENANCE OF CONCRETE BRIDGES: INVESTIGATION OF MOST SIGNIFICANT DAMAGE MECHANISMS VS. LOCATIONS . I: SynerCrete'18: Interdisciplinary Approaches for Cement-based Materials and Structural Concrete: Synergizing Expertise and Bridging Scales of Space and Time. Vol. 1&2..

Rilem publications.

ISBN 978-2-35158-202-2.

s.881-886.

Vilke, Tor Gunnar; Samarakoon, Mudiyansele Samindi Manjula K

(2018)

Numerical Analysis of Pre-fabricated Reinforced Concrete Beams with Longitudinal Cavities. I: 40th IABSE Symposium, 19-21 September 2018, Nantes, France. Tomorrow’s Megastructures.

International Association for Bridge and Structural Engineering.

ISBN 9783857481611.

s.149-156.

Samarakoon, Mudiyansele Samindi Manjula K; Ratnayake, R.M. Chandima

(2017)

Minimization of risk assessments' variability in technology qualification processes.

Journal of Offshore Mechanics and Arctic Engineering.

ISSN 0892-7219.

Volum 139.

Hefte 2.

s.021401-1-021401-8.

DOI: 10.1115/1.4035225

Ratnayake, R.M. Chandima; Samarakoon, Mudiyansele Samindi Manjula K

(2017)

Structural integrity assessment and control of ageing onshore and offshore structures. I: Modeling and Simulation Techniques in Structural Engineering.

IGI Global.

ISBN 9781522505884.

s.445-476.

Adasooriya, Mudiyan Nirosha Damayanthi; Samarakoon, Mudiyansele Samindi Manjula K; Gudmestad, Ove Tobias

(2017)

Corrosion propagation phase and bond strength degradation of reinforced concrete structures: state of the art.

International Journal of Computational Methods & Experimental Measurements.

ISSN 2046-0546.

Volum 6.

Hefte 3.

s.499-514.

DOI: 10.2495/CMEM-V6-N3-499-514

Samarakoon, Mudiyansele Samindi Manjula K; Kakay, Samdar; Tefre, Pål Lieske; Buøen, Mats Reisæter; Kaushal, Vikrant

(2016)

Identification of optimal condition for the de‐icing salt scaling resistance of concrete. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Frost Action in Concrete.

Rilem publications.

ISBN 978-2-35158-182-7.

s.131-139.

Samarakoon, Mudiyansele Samindi Manjula K; Stadnicka, Dorata; Vilke, Tor Gunnar; Ellefsen, Espen; Stangeland, Ole Magnus; Ratnayake, R.M. Chandima

(2016)

Assessment of value stream of formwork preparation process in prefabricating reinforced concrete elements. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Fresh Concrete.

Rilem publications.

ISBN 978-2-35158-184-1.

s.63-72.

Samarakoon, Mudiyansele Samindi Manjula K; Ratnayake, R.M. Chandima

(2016)

Minimization of uncertainty during technology qualification process: fuzzy logic based approach. I: Proceedings of the Twenty-sixth International Ocean and Polar Engineering Conference - ISOPE 2016.

International Society of Offshore & Polar Engineers.

ISBN 978-1-880653-88-3.

s.1126-1133.

Samarakoon, Mudiyansele Samindi Manjula K; Kakay, Samdar; Johnsen, Erland Soli; Knutsen, Fredrik Meidell; Knutsson, Jon Emil Tobias

(2016)

PERFORMANCE EVALUATION OF APLITE ROCK BASED GEOPOLYMER BINDER. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Concrete With Supplementary Cementitious Materials.

Rilem publications.

ISBN 978-2-35158-178-0.

s.1-9.

Samarakoon, Mudiyansele Samindi Manjula K; Sælensminde, Jan; Helle, Cecilie Myklebu

(2016)

CONDITION ASSESSMENT OF REINFORCED CONCRETE ELEMENTS EXPOSED TO CARBONATION. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Service Life of Cement-Based Materials and Structures Vol. 1 .

Rilem publications.

ISBN 978-2-35158-170-4.

s.29-37.

Sælensminde, Jan; Samarakoon, Mudiyansele Samindi Manjula K

(2016)

DETERIORATION OF CONCRETE STRUCTURES DUE TO SALT CRYSTALLIZATION; INFLUENCE OF SALT TYPES AND RELATIVE HUMIDITY. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Moisture in Materials and Structures.

Rilem publications.

ISBN 978-2-35158-178-0.

s.107-114.

Samarakoon, Samindi; Ratnayake, R.M. Chandima

(2015)

Strengthening, modification and repair techniques' prioritization for structural integrity control of ageing offshore structures.

Reliability Engineering & System Safety.

ISSN 0951-8320.

Volum 135.

s.15-26.

DOI: 10.1016/j.ress.2014.10.023

Samarakoon, Samindi; Vie, Ørjan Sletbakk; Fjelldal, Remi Kleiven

(2015)

Self-Compacting White Concrete Mix Design Using the Particle Matrix Model.

World Academy of Science, Engineering and Technology.

ISSN 1307-6892.

Volum 9.

Hefte 7.

s.747-751.

Samarakoon, Samindi; Ratnayake, R.M. Chandima

(2014)

Improving the efficiency of technology qualification in the industrial sector.

International Journal of Continuing Engineering Education and Life-Long Learning.

ISSN 1560-4624.

Volum 24.

Hefte 3/4.

s.362-376.

DOI: 10.1504/IJCEELL.2014.063084

Samarakoon, Samindi; Ratnayake, R.M. Chandima; Siriwardane, S.A.Sudath C

(2013)

Structural Integrity Control of Ageing Offshore Structures: Repairing and Strengthening with Grouted Connections. I: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering.

The American Society of Mechanical Engineers (ASME).

ISBN 978-0-7918-5535-5.

Ratnayake, R.M. Chandima; Samarakoon, Samindi

(2013)

Structural integrity control of ageing offshore structures: prioritizing smr scheme/technique for damaged structures. I: Proceedings of the Special Session on Structural Health Monitoring, 14th December 2013, Volume 01.

ISBN 978-955-589-179-0.

s.53-65.

Samarakoon, Samindi; Sæleensminde, Jan; Helle, Cecilie M.

(2013)

Durability of reinforced concrete structures subject to chloride ingress: comparison of model prediction with outcome of inspection data. I: Proceedings of the Special Session on Structural Health Monitoring, 14th December 2013, Volume 01.

ISBN 978-955-589-179-0.

s.144-153.

Samarakoon, Samindi; Ratnayake, R.M. Chandima

(2013)

Use of Engineering Robust Design Approach to Improve the Surface Quality of Pre-cast Concrete Elements: An Experimental Approach.

IEEE International Conference on Industrial Engineering and Engineering Management.

ISSN 2157-3611.

Samarakoon, Samindi; Ratnayake, R.M. Chandima

(2013)

In-Service Inspection of Offshore Concrete Structures: Application of an Expert System.

IEEE International Conference on Industrial Engineering and Engineering Management.

ISSN 2157-3611.

Samarakoon, Samindi; Markeset, Tore; Gudmestad, Ove Tobias

(2012)

Life Cycle Costing as a Tool for Selecting the Best Available and Qualified Technique for Managing Physical Assets Read more: http://www.ijpe-online.com/may-2012-p3-life-cycle-costing-as-a-tool-for-selecting-the-best-available-and-qualified-technique-for-managing-physical-assets.html#ixzz2FIxbSdR6.

International Journal of Performability Engineering.

ISSN 0973-1318.

Volum 8.

Hefte 3.

s.249-264.

Samarakoon, Samindi; Gudmestad, Ove Tobias

(2011)

The IPPC directive and technique qualification at offshore oil and gas installations.

Journal of Cleaner Production.

ISSN 0959-6526.

Volum 19.

Hefte 1.

s.13-20.

DOI: 10.1016/j.jclepro.2010.08.014

Ratnayake, R.M. Chandima; Samarakoon, Samindi; Gudmestad, Ove Tobias

(2011)

Integrity management for sustainable asset operations : the role of qualification processes. I: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM2011).

COMADEM International.

ISBN 0-9541307-2-3.

s.711-721.

Samarakoon, Samindi; Gudmestad, Ove Tobias

(2011)

On the Necessity of Technology Qualification in the Offshore Wind Energy Industry. I: 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2011) - Vol. V.

The American Society of Mechanical Engineers (ASME).

ISBN 978-0-7918-4437-3.

Gudmestad, Ove Tobias; Samarakoon, Samindi

(2010)

Retaining the sustainability of oil and gas operations : qualifying the best available techniques. I: 29th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2010) : Shanghai, China, June 6-11, 2010.

The American Society of Mechanical Engineers (ASME).

ISBN 978-0-7918-3873-0.

Samarakoon, Samindi; Gudmestad, Ove Tobias

(2010)

Air pollution control in new offshore oil and gas developments using best available techniques.

WIT Transactions on Ecology and the Environment.

ISSN 1746-448X.

Hefte 136.

DOI: 10.2495/AIR100091

Samarakoon, S.M.S.M.K; Gudmestad, Ove Tobias; Melhus, M.S.L.

(2009)

Qualification of offshore facilities prior to application in a new field. I: Management of Natural Resources, Sustainable Development and Ecological Hazards II Edited by: C.A. Brebbia, N. Jovanovic & E. Tiezzi.

WIT Press.

ISBN 9781845642044.

s.85-95.

Bøker og kapitler

Pavlou, Dimitrios; Correia, José A.F.O.; Fazeres-Ferradosa, Tiago; Gudmestad, Ove Tobias; Siriwardane , Sudath C.; Lemu, Hirpa G.; Ersdal, Gerhard; Liyanage, Jayantha Prasanna; Hansen, Vidar Folke; Minde, Mona Wetrhus; RATNAYAKE MUDIYANSELAGE, Chandima; Delimitis, Andreas; El-Thalji, Idriss; Adasooriya, Mudiyan Nirosha Damayanthi; Samarakoon, Samarakoon Mudiyansele Samindi; Hemmingsen, Tor

(2024)

Analytical and experimental methods in mechanical and civil engineering : Contributions of the 1st olympiad in engineering science (OES 2023).

Springer Nature.

ISBN 978-3-031-49722-3.

Volum 28.

Hefte ..

Formidling

Samarakoon, Mudiyansele Samindi Manjula K; RATNAYAKE MUDIYANSELAGE, Chandima

(2020)

ON THE NECESSITY FOR MINIMIZING RISK BASED TECHNOLOGY QUALIFICATION VARIABILITY: AN APPLICATION TO OFFSHORE FLOATING WIND TURBINES.

Proceedings of the ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering;

2020-08-03 - 2020-08-07.

Guruge, Chavin Nilanga Naotunna Palliy; Samarakoon, Mudiyansele Samindi Manjula K; Fosså, Kjell Tore

(2019)

EXPERIMENTAL AND THEORETICAL INVESTIGATION OF CRACK SPACING IN PURE TENSION AND BENDING..

Nordic Mini Seminar;

2019-10-16 - 2019-10-17.

Naotunna, Chavin Nilanga ; Samarakoon, Mudiyansele Samindi Manjula K; Fosså, Kjell Tore

(2019)

Comparison of the experimental crack spacing behavior with the theoretical predictions .

Nordic Concrete Research.

ISSN 0800-6377.

s.23-24.

Naotunna, Chavin Nilanga ; Samarakoon, Mudiyansele Samindi Manjula K; Fosså, Kjell Tore

(2019)

Comparison of the behavior of crack width-governing parameters with existing models.

International Conference on Sustainable Materials, Systems and Structures (SMSS2019);

2019-03-20 - 2019-03-22.

Sælensmide, Jan; Samarakoon, Mudiyansele Samindi Manjula K

(2016)

Deterioration of concrete structures due to salt crystallization; influence of salt types and relative humidity.

International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016;

2016-08-22 - 2016-08-24.

Samarakoon, Samindi; Sletbakk, Ørjan; Fjelldal, Remi Kleiven

(2015)

Self-Compacting White Concrete Mix Design Using the Particle Matrix Model.

ICCSCE 2015 : XIII International Conference on Civil, Structural and Construction Engineering;

2015-07-04 - 2015-07-05.

Ratnayake, R.M. Chandima; Samarakoon, Samindi; Gudmestad, Ove Tobias

(2014)

Use of Technology Qualification in Offshore Oil and Gas Operations: An FMECA Analysis for Mitigating Potential Failures.

ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering;

2014-06-08 - 2014-06-13.

Samarakoon, Samindi; Ratnayake, R.M. Chandima

(2013)

Residual Service Life Prediction of Offshore Concrete Structures with Chloride-Induced Damage: The State Of The Art.

ASME 32nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2013);

2013-06-09 - 2013-06-14.

Samarakoon, Samindi; Ratnayake, R.M. Chandima; Siriwardane, S.A.Sudath C

(2013)

Structural Integrity Control of Ageing Offshore Structures: Repairing and Strengthening with Grouted Connections.

32nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2013);

2013-06-09 - 2013-06-14.

Samarakoon, Samindi; Ratnayake, R.M. Chandima

(2013)

In-Service Inspection of Offshore Concrete Structures: Application of an Expert System.

IEEE International Conference on Industrial Engineering and Engineering Management (IEEM);

2013-12-10 - 2013-12-13.

Samarakoon, Samindi; Sæleensminde, Jan; Myklebust Helle, Cecilie

(2013)

DURABILITY OF REINFORCED CONCRETE STRUCTURES SUBJECT TO CHLORIDE INGRESS: COMPARISON OF MODEL PREDICTION WITH OUTCOME OF INSPECTION DATA.

4th International Conference on Structural Engineering and Construction Management 2013, Kandy, Sri Lanka, 13th, 14th & 15th December 2013;

2013-12-13 - 2013-12-15.

Samarakoon, Samindi; Ratnayake, R.M. Chandima

(2013)

Use of Engineering Robust Design Approach to Improve the Surface Quality of Pre-cast Concrete Elements: An Experimental Approach.

The IEEE International Conference on Industrial Engineering and Engineering Management (IEEM);

2013-12-10 - 2013-12-13.

Ratnayake, R.M. Chandima; Samarakoon, Samindi

(2013)

STRUCTURAL INTEGRITY CONTROL OF AGEING OFFSHORE STRUCTURES: PRIORITIZING SMR SCHEME/TECHNIQUE FOR DAMAGED STRUCTURES.

4th International Conference on Structural Engineering and Construction Management 2013, Kandy, Sri Lanka;

2013-12-13 - 2013-12-15.

Ratnayake, R.M. Chandima; Samarakoon, Samindi; Markeset, Tore

(2011)

Maintenance Integrity: Managing Flange Inspections On Aging Offshore Production Facilities (OMAE2011-49050).

Proceedings of the ASME 30th International Conference on Ocean, Offshore and Arctic Engineering;

2011-06-19 - 2011-06-24.

Samarakoon, S.M.S.M.K; Gudmestad, Ove Tobias

(2009)

Qualification of offshore facilities prior to application in a new field.

SAFE 2009 (International Conferences on Safety and Security Engineering );

2009-07-01 - 2009-07-03.