Bernt Sigve Aadnøy

Professor

Bernt Sigve Aadnøy

Contact

Telephone: 51832256

Email: bernt.aadnoy@uis.no

Room: KE E-382

Department

Faculty of Science and Technology

Department of Energy and Petroleum Engineering

Publications

Vitenskapelige publikasjoner

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve; Saasen, Arild

(2024)

EFFECT OF TITANIUM NITRIDE (TiN) NANOPARTICLES ON THE LUBRICITY AND VISCOSITY OF WATER-BASED DRILLING FLUID.

Annual Transactions - The Nordic Rheology Society.

ISSN 1601-4057.

Volum 32.

s.37-52.

DOI: 10.31265/atnrs.772

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve; Askø, Arne

(2024)

EFFECT OF LUBRICANTS ON THE LUBRICITY OF AN INTERVENTION BASE OIL.

Annual Transactions - The Nordic Rheology Society.

ISSN 1601-4057.

Volum 32.

DOI: 10.31265/atnrs.771

Yavari, Hossein; Qajar, Jafar; Aadnøy, Bernt Sigve; Khosravanian, Rasool

(2023)

Selection of Optimal Well Trajectory Using Multi-Objective Genetic Algorithm and TOPSIS Method.

Arabian Journal for Science and Engineering.

ISSN 2193-567X.

DOI: 10.1007/s13369-023-08149-1

Yavari, Hossein; Fazaelizadeh, Mohammad; Aadnøy, Bernt Sigve; Khosravanian, Rasool; Qajar, Jafar; Sedaghatzadeh, Mostafa; Riazi, Masoud

(2023)

An approach for optimization of controllable drilling parameters for motorized bottom hole assembly in a specific formation.

Results in Engineering (RINENG).

ISSN 2590-1230.

Volum 20.

DOI: 10.1016/j.rineng.2023.101548

Angarita, Juan Camilo Gonzalez; Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve

(2023)

Transient Temperature and Machine Learning Modeling for Wellbore Drilling. I: ASME 2023 42nd International Conference on Ocean, Offshore and Arctic Engineering: Volume 9: Offshore Geotechnics; Petroleum Technology.

The American Society of Mechanical Engineers (ASME).

ISBN 978-0-7918-8691-5.

DOI: 10.1115/OMAE2023-108000

Aadnøy, Bernt Sigve; Kristiansen, Tron G.; Agonafir, Mesfin Belayneh

(2023)

A Unified Model for Shale Barriers. I: SPE/IADC Drilling Conference and Exhibition March 7-9, 2023.

Society of Petroleum Engineers.

ISBN 978-1-61399-875-5.

DOI: 10.2118/212556-MS

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve

(2022)

Bridging performances of lost circulation materials (LC-LUBE and mica) and their blending in 80/20 and 60/40 oil-based drilling fluids.

Frontiers in Physics.

ISSN 2296-424X.

Volum 10:1042242.

s.1-14.

DOI: 10.3389/fphy.2022.1042242

Nystad, Magnus; Aadnøy, Bernt Sigve; Pavlov, Alexey

(2021)

Real-Time Minimization of Mechanical Specific Energy with Multivariable Extremum Seeking.

Energies.

ISSN 1996-1073.

Volum 14.

Hefte 5.

DOI: 10.3390/en14051298

Gholami, Raoof; Raza, Arshad; Aadnøy, Bernt Sigve; Rabiei, Minou; Rasouli, Vamegh

(2021)

Time-dependent compaction of deep-water reservoirs: a study on the viscous behavior of unconsolidated sandstone .

Journal of Natural Gas Science and Engineering.

ISSN 1875-5100.

Volum 91.

s.1-8.

DOI: 10.1016/j.jngse.2021.103952

Khosravanian, Rasool; Aadnøy, Bernt Sigve

(2021)

Closed-loop well construction optimization (CLWCO) using stochastic approach under time uncertainty.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 204.

DOI: 10.1016/j.petrol.2021.108566

Yavari, Hossein; Khosravanian, Rasool; Wood, David A.; Aadnøy, Bernt Sigve

(2021)

Application of mathematical and machine learning models to predict differential pressure of autonomous downhole inflow control devices.

Advances in Geo-Energy Research.

ISSN 2207-9963.

Volum 5.

Hefte 4.

s.386-406.

DOI: 10.46690/ager.2021.04.05

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve; Strømø, Simen Moe

(2021)

MoS2 Nanoparticle Effects on 80°C Thermally Stable Water-Based Drilling Fluid.

Materials.

ISSN 1996-1944.

Volum 14.

Hefte 23.

DOI: 10.3390/ma14237195

Nystad, Magnus Edvard; Aadnøy, Bernt Sigve; Pavlov, Alexey

(2021)

Micro-Testing While Drilling for Rate of Penetration Optimization: Experiments and Simulations.

Journal of Offshore Mechanics and Arctic Engineering.

ISSN 0892-7219.

Volum 144.

Hefte 3.

DOI: 10.1115/1.4053127

Ashena, Rahman; Hekmatinia, Abdol-Azim; Ghalambor, Ali; Aadnøy, Bernt Sigve; Enget, Charissa; Rasouli, Vamegh

(2021)

Improving drilling hydraulics estimations ‑ a case study.

Journal of Petroleum Exploration and Production Technology.

ISSN 2190-0558.

Volum 11.

s.2763-2776.

DOI: 10.1007/s13202-021-01203-4

Mansouri, Vahid; Khosravanian, Rasool; Wood, David A.; Aadnøy, Bernt Sigve

(2020)

Optimizing the separation factor along a directional well trajectory to minimize collision risk.

Journal of Petroleum Exploration and Production Technology.

ISSN 2190-0558.

Volum 10.

Hefte 5.

s.2113-2125.

DOI: 10.1007/s13202-020-00876-7

Khosravanian, Rasool; Aadnøy, Bernt Sigve

(2020)

Minimizing Risk by Determining A Safe Mud Weight Window for Offshore Wellbore Construction.

World Oil.

ISSN 0043-8790.

Volum 241.

Hefte 8.

s.17-21.

Khosravanian, Rasool; Aadnøy, Bernt Sigve

(2020)

Optimized Drilling Saves Time in the Persian Gulf.

Oil & Gas Journal.

ISSN 0030-1388.

Volum Volume 118.

Hefte 9.

s.45-49.

Zhang, Hua; Yin, Shunde; Aadnøy, Bernt Sigve

(2019)

Numerical investigation of the impacts of borehole breakouts on breakdown pressure.

Energies.

ISSN 1996-1073.

Volum 12.

Hefte 5.

s.1-23.

DOI: 10.3390/en12050888

Zhang, Hua; Yin, Shunde; Aadnøy, Bernt Sigve

(2018)

Poroelastic modeling of borehole breakouts for in-situ stress determination by finite element method.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 162.

s.674-684.

DOI: 10.1016/j.petrol.2017.10.085

Gholami, Raoof; Rabiei, Minou; Aadnøy, Bernt Sigve; Rasouli, Vamegh

(2018)

A methodology for wellbore stability analysis of drilling into presalt formations: A case study from southern Iran.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 167.

s.249-261.

DOI: 10.1016/j.petrol.2017.11.023

Han, Hong Xue; Yin, Shunde; Aadnøy, Bernt Sigve

(2018)

Impact of elliptical boreholes on in situ stress estimation from leak-off test data.

Petroleum Science.

ISSN 1672-5107.

s.1-7.

DOI: 10.1007/s12182-018-0248-8

Aadnøy, Bernt Sigve

(2018)

Technology Focus: Multilateral/Extended Reach Wells.

Journal of Petroleum Technology.

ISSN 0149-2136.

Volum 70.

Hefte 5.

s.65-65.

Alvi, Muhammad Awais Ashfaq; Agonafir, Mesfin Belayneh; Saasen, Arild; Fjelde, Kjell Kåre; Aadnøy, Bernt Sigve

(2018)

Effect of MWCNT and MWCNT Functionalized -OH and -COOH Nanoparticles in Laboratory Water Based Drilling Fluid . I: ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering - Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology.

The American Society of Mechanical Engineers (ASME).

ISBN 978-0-7918-5129-6.

DOI: 10.1115/OMAE2018-78702

Alvi, Muhammad Awais Ashfaq; Agonafir, Mesfin Belayneh; Saasen, Arild; Aadnøy, Bernt Sigve

(2018)

The Effect Of Micro-sized Boron Nitride (BN) and Iron trioxide (Fe2O3) Nanoparticles on the Properties of Laboratory Bentonite Drilling Fluid. I: SPE Norway One Day Seminar 2018.

Society of Petroleum Engineers.

ISBN 978-1-61399-609-6.

DOI: 10.2118/191307-MS

Zhang, Hua; Yin, Shunde; Aadnøy, Bernt Sigve

(2018)

Finite-element modeling of borehole breakouts for in situ stress determination.

International Journal of Geomechanics.

ISSN 1532-3641.

Volum 18.

Hefte 12.

DOI: 10.1061/(ASCE) GM.1943-5622.0001322

Sui, Dan; Sukhoboka, Olha; Aadnøy, Bernt Sigve

(2017)

Improvement of Wired Drill Pipe Data Quality via Data Validation and Reconciliation.

International Journal of Automation and Computing.

ISSN 1476-8186.

s.1-12.

DOI: 10.1007/s11633-017-1068-9

Gholami, Raoof; Aadnøy, Bernt Sigve; Leong, Yan Foon; Elochukwu, Henry

(2017)

A methodology for wellbore stability analysis in anisotropic Formations: A case study from the Canning Basin, Western Australia.

Journal of Natural Gas Science and Engineering.

ISSN 1875-5100.

Volum 37.

s.341-360.

DOI: 10.1016/j.jngse.2016.11.055

Aadnøy, Bernt Sigve

(2017)

Technology Focus: Multilateral/Extended-Reach Wells.

Journal of Petroleum Technology.

ISSN 0149-2136.

Volum 69.

Hefte 5.

s.71-72.

DOI: 10.2118/0516-0079-j

Javani, Dariush; Aadnøy, Bernt Sigve; Rastegarnia, Mahdi; Nadimi, Siavash; Aghighi, Mohammad Ali; Maleki, Bijan

(2017)

Failure criterion effect on solid production prediction and selection of completion solution.

Journal of Rock Mechanics and Geotechnical Engineering.

ISSN 1674-7755.

Volum 9.

Hefte 6.

s.1123-1130.

DOI: 10.1016/j.jrmge.2017.07.004

Gholami, Raoof; Aadnøy, Bernt Sigve; Rasouli, Vamegh; Fakhari, Nikoo

(2016)

An analytical model to predict the volume of sand during drilling and production.

Journal of Rock Mechanics and Geotechnical Engineering.

ISSN 1674-7755.

Volum 8.

Hefte 4.

s.521-532.

DOI: 10.1016/j.jrmge.2016.01.002

Sui, Dan; Aadnøy, Bernt Sigve

(2016)

Rate of Penetration Optimization using Moving Horizon Estimation.

MIC Journal: Modeling, Identification and Control.

ISSN 0332-7353.

Volum 37.

Hefte 3.

s.149-158.

DOI: 10.4173/mic.2016.3.1

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve; Annbjørg, Fiveland

(2016)

The effect of Nano-silicon dioxide (SiO2) on the properties & performance of Xanthan polymer/salt treated bentonite drilling fluid.

International Journal of NanoScience and Nanotechnology.

ISSN 0974-3081.

Volum 7.

Hefte 1.

s.63-74.

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve; Mona Fosseli, Ågotnes

(2016)

The impact of Nano-silicon dioxide (SiO2) on property and performance of the CMC polymer/Salt treated bentonite drilling fluid systems.

International Journal of NanoScience and Nanotechnology.

ISSN 0974-3081.

Volum 7.

Hefte 1.

s.75-86.

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve; Reza, Mirzai

(2016)

The Effect of Nano-Silicon Dioxide(SiO2) on Properties and Performance of LV-CMC/Xanthan Gum Polymer/Salt Treated Bentonite Drilling Fluid.

International Journal of NanoScience and Nanotechnology.

ISSN 0974-3081.

Volum 7.

Hefte 1.

s.87-97.

Khosravanian, Rassoul; Choodar, Behzad; Wood, David A.; Aadnøy, Bernt Sigve

(2016)

ROP Fuzzy-logic Model Proposed for Intelligent Drilling in Iran, Malaysia.

Oil & Gas Journal.

ISSN 0030-1388.

Volum 114.

Hefte 11.

s.58-61.

Khosravanian, Rassoul; Aadnøy, Bernt Sigve

(2016)

Optimization of casing string placement in the presence of geological uncertainty in oil wells: Offshore oilfield case studies.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 142.

s.141-151.

DOI: 10.1016/j.petrol.2016.01.033

Gholami, Raoof; Aadnøy, Bernt Sigve; Fakhari, Nikoo

(2016)

A Thermo-Poroelastic Analytical Approach to Evaluate cement Sheath Integrity in Deep vertical Wells.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 147.

s.536-546.

DOI: 10.1016/j.petrol.2016.09.024

Gholami, Raoof; Rasouli, Vamegh; Aadnøy, Bernt Sigve; Mohammadi, Ramin

(2015)

Application of in situ stress estimation methods in wellbore stability analysis under isotropic and anisotropic conditions.

Journal of Geophysics and Engineering.

ISSN 1742-2132.

Volum 12.

Hefte 4.

s.657-673.

DOI: 10.1088/1742-2132/12/4/657

Gholami, Raoof; Rasouli, Vamegh; Aadnøy, Bernt Sigve; Mohammadnejad, Mojtaba

(2015)

Geomechanical and Numerical Studies of Casing Damages in a Reservoir with Solid Production.

Rock Mechanics and Rock Engineering.

ISSN 0723-2632.

DOI: 10.1007/s00603-015-0828-5

Gholami, Raoof; Rabiei, Minou; Rasouli, Vamegh; Aadnøy, Bernt Sigve; Fakhari, Nikoo

(2015)

Application of quantitative risk assessment in wellbore stability analysis.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 135.

s.185-200.

DOI: 10.1016/j.petrol.2015.09.013

Mansouri, Vahid; Khosravanian, Rassoul; Wood, David A.; Aadnøy, Bernt Sigve

(2015)

3-D well path design using a multi objective genetic algorithm.

Journal of Natural Gas Science and Engineering.

ISSN 1875-5100.

Volum 27.

Hefte 1.

s.219-235.

DOI: 10.1016/j.jngse.2015.08.051

Aadnøy, Bernt Sigve

(2015)

Multilateral/Extended Reach Wells.

Journal of Petroleum Technology.

ISSN 0149-2136.

Volum 67.

Hefte 05.

s.114-114.

DOI: 10.2118/0515-0114-JPT

Udegbunam, John Emeka; Aadnøy, Bernt Sigve; Fjelde, Kjell Kåre

(2014)

Uncertainty evaluation of wellbore stability model predictions.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 124.

s.254-263.

DOI: 10.1016/j.petrol.2014.09.033

Udegbunam, John Emeka; Aadnøy, Bernt Sigve; Fjelde, Kjell Kåre

(2013)

Uncertainty Evaluation of Wellbore Stability Model Predictions. I: 2013 SPE/IADC Middle East Drilling Technology Conference & Exhibition.

Society of Petroleum Engineers.

ISBN 978-1-61399-260-9.

DOI: 10.2118/166788-MS

Aadnøy, Bernt Sigve; Kårstad, Eirik; Belayneh, Mesfin Agonafir

(2012)

Casing Depth Selection Using Multiple Criteria. I: Drilling Conference and Exhibition 2012 IADC/SPE.

Society of Petroleum Engineers.

ISBN 978-1-61399-186-2.

DOI: 10.2118/150931-m

Aadnøy, Bernt Sigve; Looyeh, Reza

(2011)

Petroleum Rock mechanics -Drilling Operations and Well Design.

Gulf Professional Publishing.

ISBN 978-0-12-385546-6.

Aadnøy, Bernt Sigve; Kårstad, Eirik

(2011)

Theory and Application of Buoyancy in Wells.

Modern Applied Science.

ISSN 1913-1844.

Volum 5.

Hefte 3.

s.15-32.

DOI: 10.5539/mas.v5n3p15

Mostafavi, V.; Hareland, G.; Belayneh, Mesfin Agonafir; Aadnøy, Bernt Sigve

(2011)

Experimental and Mechanistic Modeling of Fracture Sealing Resistance with Respect to Fluid and Fracture Properties. I: 45th US rock mechanics / Geomechanics symposium.

American Rock Mechanics Association (ARMA).

ISBN 9781618391544.

Aadnøy, Bernt S.; Fazaelizadeh, Mohammad; Hareland, Geir

(2010)

A 3D Analytical Model for Wellbore Friction.

Journal of Canadian Petroleum Technology.

ISSN 0021-9487.

Volum 49.

Hefte 10.

s.25-36.

DOI: 10.2118/141515-PA

Vignes, Birgit; Aadnøy, Bernt S.

(2010)

Well-Integrity Issues Offshore Norway.

SPE Production & Operations.

ISSN 1930-1855.

Volum 25.

Hefte 2.

s.145-150.

DOI: 10.2118/112535-PA

Fazaelizadeh, Mohammad; Hareland, Geir; Aadnøy, Bernt Sigve

(2010)

Application of New 3-D Analytical Model for Directional Wellbore Friction.

Modern Applied Science.

ISSN 1913-1844.

Volum 4.

Hefte 2.

Aadnøy, Bernt Sigve; Kårstad, Eirik

(2010)

Elliptical geometry model for sand production during depletion. I: Value, resources and innovation : sustaining the decade : IADC/SPE Asia Pacific Drilling Technology Conference : 1-3 November 2010, Sheraton Saigon Hotel & Towers, Ho Chi Minh City, Vietnam : proceedings.

Society of Petroleum Engineers.

ISBN 978-1-55563-314-1.

Aadnøy, Bernt Sigve; Kårstad, Eirik

(2010)

History model for sand production during depletion. I: Workshop CD-ROM of the 72nd EAGE Annual Conference & Exhibition incorporating SPE EUROPEC 2010, 14-17 June 2010, Barcelona, Spain.

Society of Petroleum Engineers.

ISBN 978-90-73781-87-0.

Mirhaj Mohammadabadi, Seyed Ahmad; Kårstad, Eirik; Aadnøy, Bernt Sigve

(2010)

Minimizing Friction in Shallow Horizontal Wells. I: Value, resources and innovation : sustaining the decade : IADC/SPE Asia Pacific Drilling Technology Conference : 1-3 November 2010, Sheraton Saigon Hotel & Towers, Ho Chi Minh City, Vietnam : proceedings.

Society of Petroleum Engineers.

ISBN 978-1-55563-314-1.

Aadnøy, Bernt S.; Belayneh, Mesfin

(2009)

A New Fracture Model That Includes Load History, Temperature, and Poisson's Effects.

SPE Drilling & Completion.

ISSN 1064-6671.

Volum 24.

Hefte 3.

s.452-455.

Aasen, Jan; Aadnøy, Bernt S.

(2009)

Multistring analysis of wellhead movement.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 66.

Hefte 3-4.

s.111-116.

DOI: 10.1016/j.petrol.2009.01.010

Khosravanian, Rasool; Kryanezhad, M.B.; Makur, Ahmad; Aadnøy, Bernt S.; Naderifar, Abbas

(2009)

Modeling optimizes casing points in Persian Gulf wells.

Oil & Gas Journal.

ISSN 0030-1388.

Volum 107.

Hefte 1.

s.40-47.

Kaarstad, Eirik; Aadnøy, Bernt S.; Fjelde, T.

(2009)

A Study of Temperature Dependent Friction in Wellbore Fluids (Paper Number 119768-MS). I: Richardson, Tex. : Richardson, Tex. : Society of Petroleum Engineers.

Society of Petroleum Engineers.

Aadnøy, Bernt S.; Hareland, Geir

(2009)

Analysis of Inflow Control Devices (Paper Number 122824-MS). I: Society of Petroleum Engineers.

Society of Petroleum Engineers.

Davy, Claire; Aadnøy, Bernt S.

(2009)

The well-construction process. I: Advanced drilling and well technology.

Society of Petroleum Engineers.

ISBN 978-1-55563-145-1.

s.1-16.

Aadnøy, Bernt S.; Djurhuus, Joannes

(2009)

Normalization and inversion methods. I: Advanced drilling and well technology.

Society of Petroleum Engineers.

ISBN 978-1-55563-145-1.

s.414-440.

Mustafavi, Vahid; Kustamsi, Andang; Hareland, Geir; Aadnøy, Bernt S.; James, John A.

(2009)

Application of a Drilling Simulator in Risk Analysis of Drilling Operations SPE/IADC 123910. I: SPE/IADC Middle East Drilling Technology Conference & Exhibition : 26-28 Oct 2009, Manama, Bahrain : "managing limited resources to overcome today's challenges" : conference proceedings.

Society of Petroleum Engineers.

ISBN 978-1-55563-265-6.

Aadnøy, Bernt S.; Mustafavi, Vahid; Hareland, Geir

(2009)

Fracture Mechanics Interpretation of Leak-Off Tests SPE 126452. I: 2009 Kuwait International Petroleum Conference and Exhibition - Meeting Energy Demand for Long Term Economic Growth.

Society of Petroleum Engineers.

ISBN 9781555632731.

Shirkavand, F.; Hareland, Geir; Aadnøy, Bernt S.

(2009)

Rock mechanical modelling for a underbalanced drilling rate of penetration prediction. I: Asheville 2009 43rd U.S. Rock Mechanics 3rd U.S.-Canada Rock Mechanics Symposium.

American Rock Mechanics Association (ARMA).

Aadnøy, Bernt S.; Hareland, Geir; Freitas, T.; Hayes, J.

(2009)

Borehole Failure Related to Bedding Plane. I: 43rd U.S. Rock Mechanics 3rd U.S.-Canada Rock Mechanics Symposium.

American Rock Mechanics Association (ARMA).

Khosravanian, Rasool; Aryanezhad, M. B.; Sadjadi, Seyed J.; Barzinpour, Farnaz; Aadnøy, Bernt S.; Naderifar, Abbas

(2009)

Planning optimal casing points.

World Oil.

ISSN 0043-8790.

Volum 230.

Hefte 6.

Aadnøy, Bernt S.; Belayneh, Mesfin; Arriado, Miguel; Flateboe, Roar

(2008)

Design of well barriers to combat circulation losses.

SPE Drilling & Completion.

ISSN 1064-6671.

Volum 23.

Hefte 3.

s.295-300.

DOI: 10.2118/105449-PA

Kårstad, Eirik; Aadnøy, Bernt S.

(2008)

Improved prediction of shallow sediment fracturing for offshore applications.

SPE Drilling & Completion.

ISSN 1064-6671.

Volum 23.

Hefte 2.

s.88-92.

DOI: 10.2118/101178-PA

Vignes, Birgit; Tonning, Stein A.; Aadnøy, Bernt S.

(2008)

Injection Wells with Integrity Challenges on the NCS. I: http://www.spe.org/.

Society of Petroleum Engineers.

Shen, Hendry; Aadnøy, Bernt S.

(2008)

Feasibility Study of Combining Drilling with Casing and Expandable Casing. I: http://www.spe.org/.

Society of Petroleum Engineers.

Aadnøy, Bernt S.; Djurhuus, Joannes

(2008)

Theory and Application of a New Generalized Model for Torque and Drag. I: http://www.spe.org/.

Society of Petroleum Engineers.

Aadnøy, Bernt S.; Belayneh, Mesfin

(2008)

A New Fracture Model that includes Load History, Temperature and Poissons Effects. I: http://www.spe.org/.

Society of Petroleum Engineers.

Vignes, Birgit; Aadnøy, Bernt S.

(2008)

Well-Integrity Issues Offshore Norway. I: http://www.spe.org/.

Society of Petroleum Engineers.

Aasen, Jan; Aadnøy, Bernt S.

(2007)

Three-dimensional well tubular design improves margins in critical wells.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 56.

s.232-240.

Aadnøy, Bernt S.; Kaarstad, Eirik

(2007)

Mud design to prevent circulation losses.

Journal of Petroleum Technology.

ISSN 0149-2136.

Volum vol.59.

Hefte no. 11.

s.82-85.

Aadnøy, Bernt S.; Kaarstad, Eirik; Belayneh, Mesfin

(2007)

Elastoplastic fracture model improves predictions in deviated wells. I: spe.org/elibrary.

Society of Petroleum Engineers.

Aadnøy, Bernt S.; Belayneh, Mesfin

(2007)

Design of well barriers to combat circulation losses. I: spe.org/elibrary.

Society of Petroleum Engineers.

Aadnøy, Bernt S.

(2006)

Mechanics of Drilling.

Shaker Verlag.

ISBN 3832248617.

Hefte 1.

Aadnøy, Bernt S.; Kaarstad, Eirik

(2006)

Fracture Model for General Offshore Applications. I: Proceedings for 2006 Asia pacific Oil and Gas Conference.

Society of Petroleum Engineers.

Aadnøy, Bernt S.; Kaarstad, Eirik

(2006)

Theory and Application of Buoyancy in Wells. I: Proceedings for 2006 IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition.

Society of Petroleum Engineers.

Aadnøy, Bernt S.; Djurhuus, Joannes; Fabiri, Vincent T.

(2006)

Construction of Ultra-Long Wells Using a Catenary Well Profile. I: Proceedings of the 2006 IADC/SPE Drilling Conference.

Society of Petroleum Engineers.

Aadnøy, Bernt S.; Hansen, Ann Kristin

(2005)

Bounds on in-situ stress magnitudes improve wellbore stability analyses.

SPE Journal.

ISSN 1086-055X.

Volum 10.

s.115-120.

Aadnøy, Bernt S.; Belayneh, Mesfin

(2004)

Elasto-plastic fracturing model for non-penetrating fluids.

?.

Aadnøy, Bernt S.; Belayneh, Mesfin

(2004)

Elasto-plastic fracturing model for wellbore stability using non-penetrating fluids.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 45.

Ong, See Hong; Aadnøy, Bernt S.

(2003)

Introduction to Special Issue on Borehole Stability.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 38.

Hefte 03.apr.

s.79-82.

Djurhuus, Joannes; Aadnøy, Bernt S.

(2003)

In situ stress state from inversion of fracturing data from oil wells and borehole image logs.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 38.

Hefte 03.apr.

s.121-130.

Aadnøy, Bernt S.; Sætre, Roar

(2003)

Drilling & Production - New model improves deepwater fracture gradient values off Norway.

Oil & Gas Journal.

ISSN 0030-1388.

Volum 101.

Hefte 5.

s.51-55.

Aadnøy, Bernt S.; Larsen, Kenneth; Berg, Per C.

(2003)

Analysis of stuck pipe in deviated boreholes.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 37.

Hefte 3.

s.195-213.

Aadnøy, Bernt S.; Edland, Cecilie

(2001)

Borehole stability of multilateral junctions.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 30.

Hefte 03.apr.

s.245-255.

Aadnøy, Bernt S.; Andersen, Ketil

(2001)

Design of oil wells using analytical friction models.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 32.

Hefte 1.

s.53-71.

Kårstad, Eirik; Aadnøy, Bernt S.

(1998)

Temperature model provides information for well control.

Oil & Gas Journal.

ISSN 0030-1388.

Volum Vol. 96.

Hefte No. 37.

s.76-84.

Kårstad, Eirik; Aadnøy, Bernt S.

(1998)

Density Behavior of Drilling Fluids During HP/HT Drilling.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum nov.98.

Aadnøy, B.S.

(1998)

A system to classify drilling induced fractures and their relations to the in-situ stress directions.

?.

Karstad, Erik; Aadnøy, B.S.

(1998)

Temperature model provides information for well control.

Oil & Gas Journal.

ISSN 0030-1388.

Volum 96.

Hefte 37.

s.76-80.

Finjord, Jan; Aadnøy, Bernt S.

(1996)

Analytical solution of the Bolzmann transient line sink for an oil reservoir with pressure dependent formation properties.

Petroleum science and technology.

ISSN 1091-6466.

Volum 15.

s.343-360.

Aadnøy, B.S.

(1996)

Historien om New Imperial.

?.

Volum 2.

Lindholm, C.D.; Bungum, H.; Bratli, H.K.; Dahl, N.; Tørrudsbakken, B.; Atakan, A.; Aadnøy, B.S.

(1995)

Crustal Stress in the north Sea as Inferred from Borehole Breakouts and Earthquake Focal Mechanism.

Terra Nova.

ISSN 0954-4879.

Volum 7.

s.51-59.

Aadnøy, B.S.; Angell-Olsen, F.

(1995)

Some effects of eilipticity on the fracturing and collapse vehavior of a verehole.

?.

Volum 32.

s.621-627.

Aadnøy, B.S.; Ravnøy, J.

(1994)

Improved pressure drop/flow rate equation for non-Newtonian fluids in laminar flow.

Journal of Petroleum Science and Engineering.

ISSN 0920-4105.

Volum 11.

s.261-266.

Bøker og kapitler

Khosravanian, Rasool; Aadnøy, Bernt Sigve

(2021)

Methods for Petroleum Well Optimization : Automation and Data Solutions.

Gulf Professional Publishing.

ISBN 9780323902311.

Aadnøy, Bernt Sigve; Looyeh, Reza

(2019)

Petroleum rock mechanics : drilling operations and well design.

Gulf Professional Publishing.

ISBN 9780128159033.

Aadnøy, Bernt Sigve

(2017)

Petroleum Rock Mechanics - Drilling operations and well design.

Elsevier.

ISBN 9780123855466.

Aadnøy, Bernt Sigve; Looyeh, Reza

(2014)

Mechänica de Rochas aplicada.

Elsevier.

ISBN 978-85-352-7318-2.

Aadnøy, Bernt Sigve

(2014)

Petroleum Rock Mechanics - Drilling operations and well design.

Elsevier.

ISBN 9788535273182.

Aadnøy, Bernt Sigve; Looyeh, Reza

(2013)

Petroleum Rock Mechanics: Drilling Operations and Well Design.

Gulf Professional Publishing.

ISBN 978-7-5636-4018-8.

Aadnøy, Bernt S.

(2010)

Modern well design.

CRC Press.

ISBN 9780415884679.

Aadnøy, Bernt S.; Cooper, Lain; Miska, Stefan; Mitchell, Robert F; Payne, Michael L

(2009)

Advanced drilling and well technology.

Society of Petroleum Engineers.

ISBN 978-1-55563-145-1.

Aadnøy, Bernt S.; Djurhuus, Joannes

(2002)

Non-Linear and Linear Theory for Determining the In-Situ Stress State from Multiple Fracturing Data.

Universitetet i Stavanger.

ISBN 8276441734.

Aadnøy, B.S.

(1996)

Modern Well Design.

ISBN 90-541-0633-6.

Formidling

Aadnøy, Bernt Sigve; Kristiansen, Tron Golden; Agonafir, Mesfin Belayneh

(2023)

A Unified Model for Shale Barriers.

SPE/IADC International Drilling Conference and Exhibition, Stavanger, Norway, March 2023;

2023-03-07 - 2023-03-09.

Angarita, Camilo; Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve

(2023)

TRANSIENT TEMPERATURE AND MACHINE LEARNING MODELING FOR WELLBORE DRILLING.

ASME 2023 42nd International Conference on Ocean, Offshore, and Arctic Engineering OMAE2023;

2023-06-11 - 2023-06-16.

Khosravanian, Rasool; Aadnøy, Bernt Sigve

(2020)

Uncertainty Evaluation of Wellbore Stability Using Comparative Rock Strength Criterions.

OMAE 2020,39th International Conference on Ocean, Offshore & Arctic Engineering, Volume 11: Petroleum Technology ,ISBN: 978-0-7918-8443-0;

2020-08-03 - 2020-08-07.

Aadnøy, Bernt Sigve

(2020)

Multilateral and Complex-Trajectory Wells.

Journal of Petroleum Technology.

ISSN 0149-2136.

Volum 72.

Hefte 5.

Aadnøy, Bernt Sigve

(2019)

Multilateral and Complex-Trajectory Wells.

Journal of Petroleum Technology.

ISSN 0149-2136.

Volum 71.

Hefte 5.

DOI: 10.2118/0519-0071

Aadnøy, Bernt Sigve; Sui, Dan

(2018)

The importance of physicis in drill string modelling.

Fourth International Colloquium on Nonlinear Dynamics and Control of Deep Drilling Systems;

2018-05-14 - 2018-05-16.

Aadnøy, Bernt Sigve

(2018)

Stuck Pipe Analysis in Extended Reach Wells.

Extended reach and frontier drilling operations/ technologies;

2018-12-06 - 2018-12-07.

Aadnøy, Bernt Sigve

(2017)

Robust Autonomous Flow Control Developments in Norway.

SPE Inwell Flow conference;

2017-10-03 - 2017-10-04.

Aasen, Jan Aage; Aadnøy, Bernt Sigve

(2017)

SPE-188605-MS Revitalized Three-Dimensional Design Method Improves Tubular Design.

Abu Dhabi International Petroleum Exhibition & Conference;

2017-11-13 - 2017-11-16.

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve

(2016)

Effect of Nano-Silicon Dioxide (SiO2) on Polymer/Salt Treated Bentonite Drilling Fluid Systems.

ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering;

2016-06-19 - 2016-06-24.

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve; Sharma, Thomas

(2016)

Dynamic and Static Sagging Characterization and Performances of Four Oil Based Muds.

ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering;

2016-06-19 - 2016-06-24.

Aadnøy, Bernt Sigve

(2016)

Cost Optimization Using Multivariate methods.

KAUST Research Conference: Advances in Well Construction with Focus on Near-Wellbore Physics and Chemistry Agenda;

2016-11-07 - 2016-11-09.

Aadnøy, Bernt Sigve

(2016)

Autonomous Inflow Control, Water Removal and Water Stop Technologies.

Inflow Control Technology Forum;

2016-09-28 - 2016-09-29.

Aadnøy, Bernt Sigve

(2016)

Challenges and Solutions in Drilling Engineering.

Forskningsseminar;

2016-11-18.

Mirhaj, Seyed Ahmad; Kaarstad, Eirik; Aadnøy, Bernt Sigve

(2016)

Torque and Drag Modeling: Soft-string Versus Stiff-string Models..

SPE/IADC middle East drilling Technology Conference and Exhibition;

2016-01-26 - 2016-01-28.

Aadnøy, Bernt Sigve

(2016)

Challenges and Solutions in Well Engineering.

Research seminar;

2016-11-18.

Belayneh, Mesfin Agonafir; Aadnøy, Bernt Sigve

(2015)

DESIGNING DRILLING FLUIDS TO COMBAT LOSS CIRCULATION FOR ARCTIC ENVIRONMENTS.

OMAE2015;

2015-05-31 - 2015-06-05.

Agonafir, Mesfin Belayneh; Aadnøy, Bernt Sigve

(2015)

Effect of Nano & Micro sized particle additives on the mechanical strength of cement plug, OMAE2015-41756.

ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering;

2015-05-31 - 2015-06-05.

Aadnøy, Bernt Sigve

(2015)

På plass i ingeniørane sitt Hall of fame.

Aadnøy, Bernt Sigve

(2015)

Han sluttet på skolen i 7. klasse. Nå er Bernt en levende ingeniørlegende.

Teknisk Ukeblad.

ISSN 0040-2354.

Aadnøy, Bernt Sigve

(2015)

Technology Focus.

Journal of Petroleum Technology.

ISSN 0149-2136.

Volum 67.

Hefte 5.

s.114-114.

Aadnøy, Bernt Sigve

(2015)

Challenges and solutions in well engineering.

Invitert foredrag ;

2015-11-04 - .

Aadnøy, Bernt Sigve

(2015)

Research subects for well technology.

Seminar;

2015-11-05 - .

Aadnøy, Bernt Sigve

(2015)

Multilateral/extended-reach wells.

Journal of Petroleum Technology.

ISSN 0149-2136.

Volum 67.

Hefte 5.

Aadnøy, Bernt Sigve

(2014)

Casing Cutter.

Prekubators Innovasjonsseminar;

2014-12-10.

Aadnøy, Bernt Sigve

(2014)

FloWizard.

Prekubators Inovasjonsseminar;

2014-12-10 - .

de Azevedo, Ricardo Cabral; Awannegbe, Patrick Edohamen; Aadnøy, Bernt Sigve

(2014)

Autonomous Inflow Cotrol Devoce for Horizontal Wells in the Barents Sea.

SPE Workshop in Arctic Norway;

2014-03-10 - 2014-03-12.

Tahmeen, Mazeda; Hareland, Geir; Aadnøy, Bernt Sigve

(2014)

Real-Time Software to Estimate Friction Coefficient and Downhole Weight on Bit During Drilling.

OMAE 2014;

2014-06-08 - 2014-06-13.

Aadnøy, Bernt Sigve; Hansen, Henning

(2012)

Performance Test Results of a New Autonomous Flow Control Device.

Passive Inflow Control Forum Conference;

2012-03-27 - 2012-03-28.

Aadnøy, Bernt Sigve; Kaarstad, Eirik; Belayneh, Mesfin Agonafir

(2012)

Multiple Criteria Casing Seat Selection Method.

2012 IADC/SPE Drilling Conference and Exhibition;

2012-03-06 - 2012-03-08.

Aadnøy, Bernt Sigve

(2012)

Low ROP in Basalt - Experience from the Faroe islands.

Hard Rock Drilling Workshop;

2012-12-12.

Torgergsen, Hans-Emil Bensnes; Haga, Hilde Brandanger; Sangesland, Sigbjørn; Aadnøy, Bernt Sigve; Sæbø, Jan; Johnsen, Ståle; Rausand, Marvin; Lundeteigen, Mary Ann

(2012)

An Introduction to Well Integrity.

Aadnøy, Bernt Sigve

(2011)

Qualitative Assurance of Wellbore Stability Analyses.

SPE/IADC Drilling Conference and Exhibition;

2011-03-01 - 2011-03-03.

Mirhaj, Seyed Ahmad; Kårstad, Eirik; Aadnøy, Bernt S.

(2010)

New Aspects of Torque-and-Drag Modeling in Extended Reach Wells.

2010 ATCE conferece;

2010-09-19 - 2010-09-22.

Kaarstad, Eirik; Aadnøy, Bernt S.; Fjelde, T.

(2009)

A Study of Temperature Dependent Friction in Wellbore Fluids.

SPE/IADC Drilling Conference and Exhibition;

2009-03-17 - 2009-03-19.

Aadnøy, Bernt S.; Hareland, Geir

(2009)

Analysis of Inflow Control Devices.

Offshore Europe;

2009-09-08 - 2009-09-11.

Mustafavi, Vahid; Kustamsi, Andang; Aadnøy, Bernt S.; James, John A.

(2009)

Application of a Drilling Simulator in Risk Analysis of Drilling Operations.

2009 SPE/IADC Middle East Drilling Technology Conference & Exhibition;

2009-10-26 - 2009-10-28.

Aadnøy, Bernt S.; Mustafavi, Vahid; Hareland, Geir

(2009)

Fracture Mechanics Interpretation of Leak-Off Tests.

2009 Kuwait International Petroleum Conference and Exhibition;

2009-12-14 - 2009-12-16.

Shirkavand, F.; Hareland, Geir; Aadnøy, Bernt S.

(2009)

Rock mechanical modelling for a underbalanced drilling rate of penetration prediction.

43rd U.S. Rock Mechanics 3rd U.S.-Canada Rock Mechanics Symposium;

2009-06-28 - 2009-07-01.

Aadnøy, Bernt S.; Hareland, Geir; Kustamsi, Andang; Freitas, T.; Hayes, J.

(2009)

Borehole Failure Related to Bedding Plane.

43rd U.S. Rock Mechanics 3rd U.S.-Canada Rock Mechanics Symposium;

2009-06-28 - 2009-07-01.

Aadnøy, Bernt S.; Belayneh, Mesfin

(2007)

Design of well barriers to combat circulation losses.

2007 SPE/IADC Drilling Conference;

2007-02-20 - 2007-02-22.

Aadnøy, Bernt S.; Kårstad, Terje; Belayneh, Mesfin

(2007)

Elastoplastic fracture model improves predictions in deviated wells.

2007 SPE Annual Technical Conference and Exhibition;

2007-11-11 - 2007-11-13.

Aadnøy, Bernt S.; Kaarstad, Eirik

(2007)

Integrating Stress & Pore Pressure Predictions for Exploration, Drilling and Production.

Joint SPE/AAPG/SEG Workshop;

2007-02-11 - 2007-02-13.

Aadnøy, Bernt S.; Kaarstad, Eirik

(2006)

Fracture Model for General Offshore Applications.

2006 Asia pacific Oil and Gas Conference;

2006-09-11 - 2006-09-13.

Aadnøy, Bernt S.; Kaarstad, Eirik

(2006)

Theory and Application of Buoyancy in Wells.

2006 IADC/SPE Asia Pacific Drilling Technology Conference;

2006-11-11 - 2006-11-13.

Aadnøy, Bernt S.; Djurhuus, Joannes; Fabiri, Vincent T.

(2006)

Construction of Ultra-Long Wells Using a Catenary Well profile.

2006 IADC/SPE Drilling Conference;

2006-02-21 - 2006-02-23.

Aadnøy, Bernt S.

(2006)

Technical Limits of Long Wells.

Offshore North Sea 2006;

2006-08-21 - 2006-08-23.

Aadnøy, Bernt S.

(2006)

5 Brønnhendelser 2002 - 2006.

Petroleumstilsynets Seminar om Brønnsikkerhet;

2006-05-04.

Aadnøy, Bernt S.

(2006)

Petroleum Education in Norway.

SPE Asia Pacific Colloquium on Education and Training for the Petroleum Industry;

2006-07-16 - 2006-07-19.

Aadnøy, Bernt S.

(2006)

Noen tanker omkring universitet og industri.

Norges tekniske Vitenskapsakademi;

2006-09-07.

Aadnøy, Bernt S.; Kaarstad, Eirik

(2005)

Optimization of Borehole Stability Using 3D Stress Optimization.

2005 SPE Annual Technical Conference and Exhibition;

2005-10-09 - 2005-10-12.

Aadnøy, Bernt S.

(2005)

Effects of Geometry and In-Situ Stresses on Junction Stability.

SPE Workshop on Multilateral Wells;

2005-07-24 - 2005-07-27.

Aadnøy, Bernt S.; Leistad, G.; Andreassen, J

(2005)

Well Failures from a HSE Perspective.

IADC World Drilling Conference;

2005-06-03 - 2005-06-06.

Aadnøy, Bernt S.

(2005)

Modern Well Design.

utenTitteltekst;

2005-02-25 - 2005-02-27.

Aasen, Jan; Aadnøy, Bernt S.

(2004)

Mechanistic analysis of expandable solid tubulars.

6th World Congress on Computational Mechanics, WCCM/APCOM'04;

2004-09-05.

Belayneh, Mesfin; Aadnøy, Bernt S.

(2004)

Inversion methods efficient tools for geomechanical applications.

6th World Congress on Computational Mechanics;

2004-09-05.

Aadnøy, Bernt S.

(2004)

Geomechanics in the oil industry - What have we learned and where do we go? Invited KeyNote Lecture.

6th World Concress on Computational Mechanics;

2004-09-05.

Aasen, Jan; Aadnøy, Bernt S.

(2004)

Multistring analysis of well growth.

IADC/SPE Asia Pacific Drilling Conference and Exhibition;

2004-09-13.

Aadnøy, Bernt S.; Djurhuus, Joannes

(2004)

A new dimensionless inversion method for in-situ stress determination.

Gulf Rock Conference;

2004-06-05.

Aadnøy, Bernt S.; Hansen, Ann Kristin

(2004)

Bounds on In-Situ stress magnitudes improve wellbore stability analyses.

IADC/SPE Drilling Conference;

2004-03-02.

Aadnøy, Bernt S.; Belayneh, Mesfin

(2003)

In-Situ Stress State from Inversion of a New Elasto-Plastic Fracture Model.

The 65th EAGE Conference and Exhibition (European Association of Geologists and Engineers);

2003-06-02 - 2003-06-05.

Belayneh, Mesfin; Aadnøy, Bernt S.

(2003)

Fracture Mechanics Model of Tensile Borehole Failure.

The 6th International Conference on Analysis of Discontinuous Deformation (ICADD);

2003-10-05 - 2003-10-08.

Aasen, Jan; Aadnøy, Bernt S.

(2003)

Fully Three-Dimensional Well Design Improves Margins in Critical Wells.

SPE/IADC Middle East Drilling Technology Conference and Exhibition;

2003-10-20 - 2003-10-22.

Aadnøy, Bernt S.

(2003)

Modern Well Design.

Invitert kurs forelest under IADC/SPE Drilling Engineering Conference;

2003-02-18 - 2003-02-22.

Aadnøy, Bernt S.

(2003)

Extended Reach Drilling.

Invitert til å forelese kurs under The SPE/IADC Middle East Drilling Conference;

2003-09-19 - 2003-09-23.

Aasen, Jan; Aadnøy, Bernt S.

(2002)

New Buckling Model Improves Analysis.

2002 IADC/SPE Asia Pacific Drilling Technology (APDT), 9-11 September 2002 in Jakarta, Indonesia;

2002-09-09 - 2002-09-11.

Aadnøy, Bernt S.; Huusgaard, Petur P.

(2002)

Analytical Models for Design of Wellpath and BHA.

IADC/SPE Asia Pacific Drilling Technology Conference;

2002-09-09 - 2002-09-11.

Aadnøy, Bernt S.; Aasen, Jan

(2002)

Buckling Models Revisited.

IADC/SPE Asia Pacific Drilling Technology Conference.;

2002-09-09 - 2002-09-11.

Aadnøy, Bernt S.

(2002)

Modern Well Design.

Invitert kurs forelest ved IADC/SPE Asia Pacific Drilling Technology Conference;

2002-09-08 - 2002-09-12.

Aadnøy, Bernt S.; Djurhuus, Joannes

(2001)

In-situ stress state from inversion of fracturing data from oil wells.

?.

Volum 2.

s.1367-1374.

Aadnøy, Bernt S.

(2000)

Modern Well Design.

2000 IADC/SPE Drilling Conference;

2000-02-23 - 2000-02-26.

Aadnøy, Bernt S.

(2000)

Efficient methods to model stresses and to generate a good geomechanic prognosis.

SPE Forum Series in Asia Pacific II: Drilling and Completion in Hostile Formation.;

2000-05-21 - 2000-05-26.

Aadnøy, Bernt S.

(2000)

Advanced drilling technology seminar.

Scana research seminar;

2000-08-21.

Aadnøy, Bernt S.

(2000)

Modern well design.

The SPE Annual Technical Conference and Exhibition;

2000-10-01 - 2000-10-04.

Kårstad, Eirik; Aadnøy, Bernt S.

(1999)

Optimization of Mud Temperature and Fluid Models in Offshore Applications: SPE 56939.

1999 Offshore Europe Conference;

1999-09-07 - 1999-09-09.

Aadnøy, Bernt S.; Berg, Per Cato; Larsen, Kenneth

(1999)

Analysis of stuck pipe in deviated boreholes: SPE 56628.

1999 SPE Annual Technical Conference and Exhibition;

1999-10-03 - 1999-10-06.

Aadnøy, Bernt S.; Edland, Cecilie

(1999)

Borehole stability of multilateral junctions: SPE 56757.

1999 SPE Annuak Technical Conference and Exhibition.;

1999-10-03 - 1999-10-06.

Kårstad, Eirik; Aadnøy, Bernt S.

(1998)

Density Behavior of Drilling Fluids During High Pressure High Temperature Drilling Operations: SPE 47806.

IADC/SPE Asia Pacific Drilling Technology Conference '98;

1998-09-07 - 1998-09-09.

Aadnøy, B.S.

(1998)

New Technology: Money Maker or Cash Drain.

SPE Konferanse ved Høgskolen i Stavanger;

Joshi, S.D.; Aadnøy, B.S.

(1998)

Reservoir aspects of multi-lateral wells.

SPE Kurs ved Høgskolen i Stavanger;

Aadnøy, B.S.

(1998)

Betydningen av spenninger i petroleumsteknologi.

Petroleumsdagen;

Aadnøy, B.S.

(1998)

Stress modelling versus real borehole behavior.

Rock Stress in the North Sea Workshop;

Aadnøy, B.S.

(1998)

The inversion technique to determine in-situ stress and the use of mud logging to solve drilling problems.

Rock Mechanics in Petroleum Engineering Workshop;

Aadnøy, B.S.

(1998)

Wellbore stability studies and well planning in Norway.

Rock Mechanics in Petroleum Engineering Workshop,20.-22.Mars;

Aadnøy, B.S.

(1998)

Discussion of a North sea case history.

Rock Mechanics in Petroleum Engineering Workshop;

Aadnøy, B.S.

(1998)

Optimum well design for HPHT fields to maximise well productivity, reliavility and safety.

HPHT Field Development technology Conference;

Aadnøy, B.S.

(1998)

Discussion of a problem Well.

IKU Seminar on Shale Stability During Drilling;

Aadnøy, B.S.

(1998)

Interpretation of Stresses from Image Logs.

The Norwegian Formation Evaluation Society's imaging Workshop;

Aadnøy, B.S.; Bratli, R.K.; Stene, F.; Samuelsen, S.A.H.; Fagereng, S.; Bautz, S.

(1998)

Presentation of a Dicision Support Tool for Well Integrity.

The IADC European well Control Conference;

Aadnøy, B.S.; Bratli, R.K.; Lindholm, C.

(1998)

In-Situ Stress Modelling of the Snorre Field.

Euroc '94;

Aadnøy, B.S.; Dusseault, M.B.; Bratli, R.K.

(1998)

Borehole Stability Workshop.

Konferanse i Stavanger;

Aadnøy, B.S.; Bjørkevoll, K.S.; Vefring, E.H.; Rommetveit, R.

(1998)

Changes in active volume due to variations in pressure and temperature in HPHT wells.

NPF Drilling Conference;

Aadnøy, B.S.; Bratli, R.K.; Stene, F.; Giljarhus, S.; Fagereng, S.; Bautz, S.

(1998)

A Decision Support Tool for Well Integrity on a World Wide Web.

The IADC Well Control Conference Asia Pacific Region;

Aadnøy, B.S.; Kaarstad, E.

(1998)

Density behavior of drilling fluids during High Pressure High Temperature drilling operations.

IADC/SPE Asia Pacific Drilling Conference;

Aadnøy, B.S.

(1998)

Geomechanical analysis for deep-water drilling.

IADC/SPE Drilling Conference;

Aadnøy, B.S.

(1998)

Friction analysis for long-reach wells.

IADC/SPE Drilling Conference;

Aadnøy, B.S.; Kaarstad, J.

(1998)

Analysis of temperature measurements during drilling.

SPE Annual Technical Conference and Exhibition;

Aadnøy, B.S.

(1998)

The importance of stresses in petroleum engineering. Presentert ved Petroleumsdagen.

Norsk Jord- og Fjellteknisk Forbund, NIF;

Aadnøy, B.S.

(1998)

Opportunities with multilateral drilling.

Konferanse leder ved 1995 SPE Conference;

Aadnøy, B.S.

(1998)

Mechanics of Drilling.

Universitetet i Stavanger.

Kårstad, Eirik; Aadnøy, Bernt S.

(1997)

Analysis of Temperature Measurements During Drilling: SPE 38603.

1997 Annual Technical Conference and Exhibition;

1997-10-05 - 1997-10-08.

Kunstnerisk produksjon

Aadnøy, B.S.

(1998)

Permanent installert verktøy for trykktesting av borehull. Patent nr. 178553.